PDA

View Full Version : Vintage Wheels back on Unique Forum !!



BobLacey
April 30th, 2013, 05:43 PM
Hello Unique owners
I am not much of an internet blogger but thought it was time to let you all know about our 427 pin drive wheels. I spoke to Maurice last week he was unaware that we have pin drive wheels /adapters/spinners that have sufficient backspace to work on the earlier cars (with the non narrowed Jag rear) so he suggested that I make a post.
We have these wheels in the following sizes that will work on the earlly Unique ,I know most unique owners prefer the 15s (also my preference) but I thought I would mention the other sizes.
15 x 8
15 x 10
17 x 8
17 x 11
18 x 8
18 x 11
Outer rims are polished but can be flat if required . centers are gray, black,white,silver , "as cast effect" or fully polished.
Our forged hub adapters are compatible with Uniques Chev front and Jag rear hubs ,and spinners are Forged T6061 aluminum. Drive pins which replace your lugs are also forged steel so they will not stretch or break.
We can also supply wheel and tire combo - tires for the 15s such as Goodyear Billboards ,Cooper Cobra,BFG and for the 17s and 18s we usually offer Nitto.
I have attached some photos ,if you do find time to visit our web site www.vintagewheelsus.com (http://www.vintagewheelsus.com) go to 427 pin drive wheels. we have some specials going on .
Thanks to all Unique owners for your sup:rolleyes:port over the last 10 years

Bob Lacey and all at Vintage Wheels San Diego
619 952 4717

pbrown
April 30th, 2013, 08:51 PM
Do you have pin drive FIA wheels?

BobLacey
May 3rd, 2013, 10:56 AM
Hi Phil
we have the FIA pin drive wheels but not to fit the Unique with wider rear suspension
Sizes are 15 x 7.5 with 3.25 bs and 15 x 9.5 with 3.35 bs (including adapter thickness)
hope this helps
Bob 619 952 4717

pbrown
May 3rd, 2013, 11:03 AM
It does. Thanks.