Another slave question

[cwareham]

Anyone running this setup?

http://www.clubcobra.com/forums/attachment.php?attachmentid=12310&d=1169620701

I'd be attaching to a tremec 3550 (looks like it has the required mounting tabs) and using a mcleod bell housing. I suspect I'd need a clutch fork extender, but seems like it would work.

Looking forward to your feedback!
Chris

[weaver]

In the past we used a hyd slave setup that pushed instead of the pull type, I will check to see if we can still supply the parts you would need.

Alan

[cwareham]

I'm good Alan...I ended up doing a push style setup. I got it mounted up to the bell, and am using a fork in a kit put together by Mike Forte. Now that it's together I can see that it's a pretty nice piece. I was hesitant to do the HTOB, only because if I were to hose it up I didn't want to have to pull the powertrain to change it. I figured that this would be a good compromise between a pull setup and an HTOB.

http://picasaweb.google.com/wareham/BellHousingAndClutchSlaveSetup