RJacobsen
October 4th, 2005, 10:21 PM
The only parts that were cut out and not discarded were the back panel, most of the tunnel and about half of the floor. I have desided to retain the ability to remove the tunnel and back panel, so rather than fiberglass them back together I made flanges out of aluminum to hold everything.
Here are two views of the backpanel-floor-tunnel
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel 2.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel.JPG
The tunnel flange..
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange 4.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange 3.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange 2.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange.JPG
Everything installed...
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel installed.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel installed 2.JPG
To be continued...
Rod
Roseville, Ca.
289 FIA #9152 "The Flintstone Cobra"
Here are two views of the backpanel-floor-tunnel
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel 2.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel.JPG
The tunnel flange..
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange 4.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange 3.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange 2.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/tunnel flange.JPG
Everything installed...
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel installed.JPG
http://www.uniquecobra.com/uploaded/rjacobsen/floor tunnel backpanel installed 2.JPG
To be continued...
Rod
Roseville, Ca.
289 FIA #9152 "The Flintstone Cobra"