View Full Version : juanone 289 carbuild 14
newbee
July 13th, 2005, 05:56 AM
Car just came back from exhaust shop and Alan just sent me these pictures of the car with the undercar exhaust. Love those chrome tips. Getting even closer to reality. Alan put a dummy engine on the chassis for exhaust fit.
Juan
http://www.uniquecobra.com/uploaded/juanone/undercar-exhaust.jpg
http://www.uniquecobra.com/uploaded/newbee/exhaust_02.jpg
http://www.uniquecobra.com/uploaded/newbee/exhaust_03.jpg
http://www.uniquecobra.com/uploaded/newbee/exhaust_04.jpg
K.Wilson
July 13th, 2005, 07:57 AM
Juan,
Does not look like much room for suspension travel above the axle bearing carriers. Maybe it is just the camera angle, but it sure looks close to me.
Keith
juanone
July 13th, 2005, 08:07 AM
Hi Keith:
It sure does look that way. I am quite sure that Alan has already taken that into account but thanks for the tip, I will ask Alan anyway next time I talk to him.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
Brent
July 13th, 2005, 11:11 AM
I am sure Alan will love this comment.)-:
It looks like the driveshaft is too short.????
Maybe just a mock up piece.
Looks great juan!!
What are those large oval things in the pipe just under the seats. Looks like a ground clearence issue. Get rid of them (-:
Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54
juanone
July 13th, 2005, 11:20 AM
Hi Brent:
I am getting close to taking possesion of the car, I am stoked. The mufflers do look a little big but Rick and I will take a look and make any adjustments necessary. We are having the exhaust ceramic coated and we will have to remove the exhaust so if any changes are needeed we will make them then.
Body will go on the chassis today. I also made my last payment installment today so the car should be very close to being finished.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
eliminator
July 13th, 2005, 11:35 AM
As far as travel, compression on these cars in less than 3 inches and probably less than 2 inches on most I have seen. I see no problems here. As far as the mufflers, it appears to me they are higher than the scattershield, so we should be good to go;).
Rick
#4279405
Brent
July 13th, 2005, 02:07 PM
Mufflers.......OOOOHHHH that's what they are (-:
Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54
jhaynie
July 13th, 2005, 02:10 PM
Juan,
You putting any sort of reflective panels above the mufflers? I wonder what kind of heat they will produce?
john
Unique 289FIA #9367
351W Fuel Injected
juanone
July 13th, 2005, 02:15 PM
I may have to install some heat deflectors over the mufflers when we take the exhaust out for ceramic coating. Thanks for the idea.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
bomelia
July 13th, 2005, 04:10 PM
Guess I missed a lot of what lead up to this build, but what is with the under carriage mufflers?
Oh, and what is a dummy engine? A small block?:D
Mike
juanone
July 13th, 2005, 04:37 PM
If you go to the begining of the threads "Juanone 289 Build" you will understand the look of car I am after and the undercar exhaust will make sense.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
gasman
July 13th, 2005, 06:02 PM
Brent, made reference with a funny, but seriously, would you really need the mufflers with this much pipe?
Steve Foushee
Unique #4279389
Justin Upchurch
July 13th, 2005, 06:33 PM
Your car is looking very nice Juan. I enjoyed seeing the pictures of the car with the grill installed, I still think thit is one of the best features of your build. As far as the exhaust goes, do you know what size of the tubing is under the car?
Also, I thought you could use the following link to photoshop this ERA.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4561451588&category=6465&ssPageName=WDVW&rd=1
I'm sure you have seen this car before, it is a FIA built by ERA that has been set up the way your Unique will be, but blue with a red interior. This is a very nice car, and I really like the street dash layout.
Justin
bomelia
July 14th, 2005, 08:33 AM
OK...but whats a Cobra without side pipes??;)
I agree about the muffler comment...take them out unless it is illegal in your area...at the very least, replace them with some small glass packs...they still make those??
Mike
juanone
July 14th, 2005, 08:44 AM
Hi Mike:
I owned a Superformance up to this last January and had side pipes. They looked great and sounded awesome with my 427W Stroker but the look and sound I am after is that of a touring roadster sort of like a Jag XKE, Jensen Healy, 289 Street Cobra.
Besides that I cannot stand any more tattoos from hot sidepipes and the sound of Glass Packs is a little tacky for the car I am after. Just my 2 cents.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
eliminator
July 14th, 2005, 08:47 AM
Besides those are Ford Truck Mufflers...[}:)]
Rick
#4279405
Brent
July 14th, 2005, 08:53 AM
Not a Ford diesel though.
They would be 5" :D
Brent
427 SC Chassis #4279401
Candy Apple Red/White
402 FE/Toploader/3.54
bomelia
July 14th, 2005, 11:35 AM
Hey, I know where Crittenden Drive is...out near the Fair Grounds. Been there many times...Only reason I ever noted that is I grew up on a Crittenden Rd in NY.
BTW, wasn't trying to be funny or tacky about the glass pack thing...
Mike
juanone
July 14th, 2005, 11:41 AM
Hi Mike:
I am easy to find. Stop by and visit next time you are in the area. I will make you a cup of coffee and we can discuss our cars.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
Naumoff
July 15th, 2005, 03:31 PM
Jaun,
Looks great. Rare Cobras have mufflers and wire wheels![^]
Justin beat me to it.I think this is the same car on ebay. Was in the Carlise program.
Yours already looks way better.
http://www.uniquecobra.com/uploaded/Naumoff/ERA 289 street_edited.jpg
Tony
Unique 427 #4279480 427s/o Nascar toploader 3.31 Jag IRS
Justin Upchurch
July 15th, 2005, 06:22 PM
Juan,
I remember you telling me that the color of your car is a GM paint code. Was it a color available from Cadillac? The reason I ask is that a frien just purchased one and after seeing the picture the paint color looks very close to the pictures you have posted.
Justin
juanone
July 15th, 2005, 07:14 PM
Tony / Justin:
That car you posted I believe it is the one on Ebay. Yes, the color of my car is a GM color. 2003 Toreador Red. It was Used on the Saturn that year but it may well be the same color on other GM products like Cadillac.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
Slither
July 15th, 2005, 07:38 PM
Juan,
I had the opportunity to get real friendly with your little car down at Unique yesterday ;)!! It is coming along nicely. Course Alan and the crew had the body in a separate room while they were getting the chassis ready for the wedding... you know it is bad luck for them to see each other all dressed up before the big day [8D]:D:D.
To me, the color of the car seems slightly darker than in the photos you posted in the other threads. Lots of metal flake in it... sparkly [8D]!
Hang in there, it is lookin' good... won't be long now ;)!
Paul
289 FIA
2899464
408 Windsor
Toploader (wide)
3.07 rear
juanone
July 15th, 2005, 08:27 PM
Paul:
I am glad you told me that you saw my car. I envy you man. I wish it was me. How does it look? Alan told me they were trying to get the body on the chassis today Friday. Who knows the wedding may have already happened.
Next photos will probably be of the entire car, oh man I can't wait.
Paul thanks for letting me know you saw the car. You made my day.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
Slither
July 15th, 2005, 09:40 PM
Juan,
Truthfully, I was in a rush to get to several other stops, including Dutton Performance to drop off my engine project with Dan. So, I did not get a chance to really give it a thorough going over.
From what I saw, the chassis was coming together very well. Poorboy was working on getting the suspension all set up. Like I said before, it is almost a shame to cover up the chassis.
The body seems very smooth, and as I mentioned the paint has quite a lot of metal flake in it... it seems like it is kind of an almost gold color flake. (Seeing as you picked out the color, I am not telling you anything that you do not already know.) Yet, the color seems darker in person than in the photos... at least to me anyway.
Also, I was surprised at how lightweight the grill is! I do not think it will block much air flow either.
The overall look will hide the potency of this ride. Should be a real sleeper for those fast getaways and stoplight starts [8D][}:)]:D:D!!
Paul
289 FIA
2899464
408 Windsor
Toploader (wide)
3.07 rear
juanone
July 16th, 2005, 05:06 AM
Thank you Paul. I owe you a ride in it someday.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
clayfoushee
July 16th, 2005, 07:52 AM
Juan,
I like it. I'll be interested in hearing your experience with the mufflers, pipe routing, and whether there will be any clearance issues, or banging against various suspension and frame pieces. However, it looks good from what I can see. I like the fact that you are remaining true to the 289 "touring car" concept.
Clay
'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear
Annapolis, MD
clayfoushee
July 16th, 2005, 07:59 AM
Jim Harding's 1984 Unique 289
http://i21.photobucket.com/albums/b268/clayfoushee/Harding2892.jpg
http://i21.photobucket.com/albums/b268/clayfoushee/Harding2891.jpg
Clay
'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear
Annapolis, MD
scott
July 16th, 2005, 08:13 AM
you might want to get an idea of exhaust gas temps before you choose your ceramic coating i had had to have my headers recoated in high heat black the chrome looking coating did not have high enough rating (up to to 1200) and they peeled. i have a 351w with exhaust temp around 1200 degrees but up to 1300 at higher rpm's
juanone
July 16th, 2005, 08:57 AM
Hi Clay:
Thanks for posting Jim Harding's photos, what a clean car. I contemplated doing a Superformance 427 SC Street car but the Unique 289 won out. I have loved the 289 Unique look from the first Shades of the Past I went to in 2004.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
clayfoushee
July 16th, 2005, 09:05 AM
Juan, I think he has more than 40K miles on that car, and it qualifies as a legitimate "historic vehicle" in the State of MD. The car and body are more than 20 years old, and it looks virtually flawless upclose and personal, with no visual defects. He even has the original red leather installed by the Weavers in 84. It's one of my favorite Cobra replicas.
Clay
'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear
Annapolis, MD
juanone
July 16th, 2005, 09:16 AM
Clay:
Jim Harding's 427 is a great portfolio piece for the Weavers. I am quite sure, though , that Jim Has taken very good care of the car over the 20 years so it is also a great tribute to his love for the car.
Juan
Juan Lopez-Bonilla
Kentucky Cobra Club
2432 Crittenden Drive
Suite 201
Louisville, KY 40217
502-635-5711
juanlb@lbrllc.net
http://www.kentuckycobraclub.com
clayfoushee
July 16th, 2005, 09:25 AM
Actually, Jim is the second or third or 4th owner, and he knows very little about the history of the car before he bought it. He's had it at least 5 years, maybe more.
Clay
'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear
Annapolis, MD
Slither
July 16th, 2005, 03:10 PM
Thanks Juan, I will definitely take you up on that offer :D:D!! Lookin' good!!
Speaking of Jim Harding; I went to high school with a Jim Harding. Last time I saw him, he was in med-school, so I think he is a physician now... that you Jim?
Paul
289 FIA
2899464
408 Windsor
Toploader (wide)
3.07 rear
clayfoushee
July 16th, 2005, 03:19 PM
No, this Jim Harding is an electronics wizard.
Clay
'98 Unique #9299, 427FE side oiler (452.1-stroker), top-loader (close), 3.31 rear
Annapolis, MD
scott
July 16th, 2005, 03:31 PM
i thought i posted a message earlier but i dont see it, just a thought with the ceramic headers, my 351 w exhaust temps run 1200 to 1300 degrees, the chrome like ceramic coating is only good to 1200degrees headers peeled. had to redo with high heat black ceramic
scott
July 16th, 2005, 03:35 PM
oops, found it, didnt notice you had three pages worth of posts
eliminator
July 18th, 2005, 05:53 AM
Scott,
What are you using to determine exhaust temperature??????????
Rick
#4279405
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.