Brent
January 18th, 2004, 04:04 AM
I did not recieve the calipers friday so I decided to mount the handle and front cable mount today.
Here is the Lokar handle,cable assy,boot,and trim ring.
http://www.uniquecobra.com/uploaded/Brent/DSCN0557.JPG
I made a bracket out of .100 aluminum to brace the fiberglass tunnel and bent a platform for the front cable mount to bolt to.
http://www.uniquecobra.com/uploaded/Brent/DSCN0563.JPG
Next I laid out the templet and cut the hole for the handle assy.
http://www.uniquecobra.com/uploaded/Brent/DSCN0560.JPG
I then used elevator bolts through the floor to act as studs under the car. I used elevator bolts so there would be no bumps in the carpet when I finished.
http://www.uniquecobra.com/uploaded/Brent/DSCN0559.JPG
Here are the bolts and hole from under the car
http://www.uniquecobra.com/uploaded/Brent/DSCN0561.JPG
The handle and boot installed in drive position:D
http://www.uniquecobra.com/uploaded/Brent/DSCN0564.JPG
Handle in park position:D
http://www.uniquecobra.com/uploaded/Brent/DSCN0566.JPG
I will post more pics of the calipers and cable routing next week.
Brent
Here is the Lokar handle,cable assy,boot,and trim ring.
http://www.uniquecobra.com/uploaded/Brent/DSCN0557.JPG
I made a bracket out of .100 aluminum to brace the fiberglass tunnel and bent a platform for the front cable mount to bolt to.
http://www.uniquecobra.com/uploaded/Brent/DSCN0563.JPG
Next I laid out the templet and cut the hole for the handle assy.
http://www.uniquecobra.com/uploaded/Brent/DSCN0560.JPG
I then used elevator bolts through the floor to act as studs under the car. I used elevator bolts so there would be no bumps in the carpet when I finished.
http://www.uniquecobra.com/uploaded/Brent/DSCN0559.JPG
Here are the bolts and hole from under the car
http://www.uniquecobra.com/uploaded/Brent/DSCN0561.JPG
The handle and boot installed in drive position:D
http://www.uniquecobra.com/uploaded/Brent/DSCN0564.JPG
Handle in park position:D
http://www.uniquecobra.com/uploaded/Brent/DSCN0566.JPG
I will post more pics of the calipers and cable routing next week.
Brent