View Full Version : ROTATION DIRECTION
dmiller
December 28th, 2003, 06:30 AM
couple of questions.
1) looking down on the top of the distributor, small block, does the rotor rotate counterclockwise?
2) what to do about an amp meter that indicates opposite? shows a postive current when load is applied.
pgermond
December 28th, 2003, 07:36 AM
I believe the rotation is counter-clockwise. As for the ammeter... try reversing the leads.
Phil
427 Roadster, #4279436
Southern Automotive FE
3:31 and Toploader
Roseville (N.Cal)
Okiesnake
December 28th, 2003, 08:17 AM
I don't know if you are using a MSD but for some tip on wiring up a MSD6 see http://pages.sbcglobal.net/tdockstett/page4.html
dmiller
December 28th, 2003, 09:32 AM
if the reverse sensing of the amp meter is the only thing i need to correct, i'll live with it before removing the dash again.
the rotor does turn counter clockwise, when viewed from overhead, i hope that is correct.
thanks for the link. good information there.
doug
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.