View Full Version : Lower radiator hose connection 351 W
casaleenie
December 2nd, 2003, 12:09 PM
Does Unique offer the lower radiator hose assembly for the 351W engine? Mine is set up where the radiator hose is sitting on the lower control arm and not routed through the cross-member hole. I'm sure I can work something out but if Unique offers that hose and piping already cut to size, I'd just order it...
AL
dmiller
December 2nd, 2003, 12:12 PM
i have the 351 W also. used the lower hose that unique specified, went thru the front cross member's hole, the bought two 90 degree hoses, and had a short piece of exhaust tubing to join them. think it will work out ok. go to archives, much discussion on this subject.
doug
dmiller
December 2nd, 2003, 12:12 PM
i have the 351 W also. used the lower hose that unique specified, went thru the front cross member's hole, the bought two 90 degree hoses, and had a short piece of exhaust tubing to join them. think it will work out ok. go to archives, much discussion on this subject.
doug
dmiller
December 2nd, 2003, 12:14 PM
see photo,http://www.uniquecobra.com/uploaded/dmiller/DSCN1757-email.jpg
dmiller
December 2nd, 2003, 12:14 PM
see photo,http://www.uniquecobra.com/uploaded/dmiller/DSCN1757-email.jpg
COBRAGAR
December 3rd, 2003, 06:47 AM
i used a hose from auto zone # 1030 and a 90 from muffler shop and was able to cut a piece to fit from the w/pump and other 90 degree to fit the radiator
COBRAGAR
December 3rd, 2003, 06:47 AM
i used a hose from auto zone # 1030 and a 90 from muffler shop and was able to cut a piece to fit from the w/pump and other 90 degree to fit the radiator
Poorboy
December 3rd, 2003, 07:22 AM
Al,
You can do as Doug has or as Cobragar suggest with less connections.
Poorboy
Poorboy
December 3rd, 2003, 07:22 AM
Al,
You can do as Doug has or as Cobragar suggest with less connections.
Poorboy
Okiesnake
December 3rd, 2003, 07:38 AM
There was a recent thread on this before. For more info see http://uniquecobra.com/topic.asp?TOPIC_ID=268
Okiesnake
December 3rd, 2003, 07:38 AM
There was a recent thread on this before. For more info see http://uniquecobra.com/topic.asp?TOPIC_ID=268
casaleenie
December 3rd, 2003, 07:50 AM
Okiesnake,
You're correct about extensive discussion on that subject.. I got some help earlier on this... I was looking for an easy out and thought Unique had the parts to make the connection... I've found out that it's easier and cheaper for me to buy things pre-made then to do it myself... It's pathetic sounding I know but I'm basically an office worker with a hammer and a pair of pliers...
AL
casaleenie
December 3rd, 2003, 07:50 AM
Okiesnake,
You're correct about extensive discussion on that subject.. I got some help earlier on this... I was looking for an easy out and thought Unique had the parts to make the connection... I've found out that it's easier and cheaper for me to buy things pre-made then to do it myself... It's pathetic sounding I know but I'm basically an office worker with a hammer and a pair of pliers...
AL
Okiesnake
December 3rd, 2003, 07:59 AM
Al,
Unique will make you up a staight-through pipe for the cross member. It has the beaded ends to insure the hoses won't slip off. I originally ordered one from Unique, but liked the one I designed better. Unique also has the rubber large grommens to go through each hole in the cross brace.
Trent
Okiesnake
December 3rd, 2003, 07:59 AM
Al,
Unique will make you up a staight-through pipe for the cross member. It has the beaded ends to insure the hoses won't slip off. I originally ordered one from Unique, but liked the one I designed better. Unique also has the rubber large grommens to go through each hole in the cross brace.
Trent
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.