View Full Version : Body on rotary
JerryBP
November 15th, 2003, 08:58 AM
Trailered the body up to son Greg’s garage and put it on the rotary so now the body work can begin in earnest.
http://www.uniquecobra.com/uploaded/jerrybp/on rotory.jpg
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
pgermond
November 15th, 2003, 11:54 AM
Very impressive, to say the least [^] I've seen this used with metal/steel cars mounted to the frame, but what work needs to be done on a Unique using a rotisserie? Probably a dumb question if you have it available.... but???????
Phil
427 Roadster, #4279436
Southern Automotive FE
Toploader
Roseville (N.Cal)
pgermond
November 15th, 2003, 11:54 AM
Very impressive, to say the least [^] I've seen this used with metal/steel cars mounted to the frame, but what work needs to be done on a Unique using a rotisserie? Probably a dumb question if you have it available.... but???????
Phil
427 Roadster, #4279436
Southern Automotive FE
Toploader
Roseville (N.Cal)
glenn
November 15th, 2003, 12:02 PM
hello fellows, thanks for the welcome on earlier post. that looks like a great setup to work on the body,plus you have lots of room.have mine on a body buck,to go to the paint shop end of next week.started on the chassis and engine work.my color probably will be black w/gold stripes.sounds like you have choosen black also.should look great. thanks glenn.
glenn
November 15th, 2003, 12:02 PM
hello fellows, thanks for the welcome on earlier post. that looks like a great setup to work on the body,plus you have lots of room.have mine on a body buck,to go to the paint shop end of next week.started on the chassis and engine work.my color probably will be black w/gold stripes.sounds like you have choosen black also.should look great. thanks glenn.
JerryBP
November 15th, 2003, 11:29 PM
Maybe a picture of the 2x6 & 2x4 frame we built under the body will help.
http://www.uniquecobra.com/uploaded/jerrybp/frame.jpg
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
JerryBP
November 15th, 2003, 11:29 PM
Maybe a picture of the 2x6 & 2x4 frame we built under the body will help.
http://www.uniquecobra.com/uploaded/jerrybp/frame.jpg
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
Brent
November 16th, 2003, 08:12 AM
Make sure you fit the doors,hood,and trunk on the chassis. The body moves ALOT off the chassis. It would be a shame to find this out later.
Nice setup. Thats awesome!!
Brent
Brent
November 16th, 2003, 08:12 AM
Make sure you fit the doors,hood,and trunk on the chassis. The body moves ALOT off the chassis. It would be a shame to find this out later.
Nice setup. Thats awesome!!
Brent
JerryBP
November 16th, 2003, 10:36 PM
Hi Brent, Greg did fit the hood, trunklid & doors before we removed the body from the chassis and are suprised how well they still fit on my wood frame.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
JerryBP
November 16th, 2003, 10:36 PM
Hi Brent, Greg did fit the hood, trunklid & doors before we removed the body from the chassis and are suprised how well they still fit on my wood frame.
Work in Progress, Unique 427-9429 400+hp 351C Tremec 3550 5spd Coal Black
by Bruce, Greg & Jerry Porter Caldwell, Ohio
Brent
November 16th, 2003, 11:35 PM
Good deal.
Your weather is probably just like ours. Perfect time for body work. Wait...there is never a perfect time for body work. )-:
Brent
Brent
November 16th, 2003, 11:35 PM
Good deal.
Your weather is probably just like ours. Perfect time for body work. Wait...there is never a perfect time for body work. )-:
Brent
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.