JerryBP
October 17th, 2003, 02:32 AM
Thia is what we have finished on our engine. the WRP on top is the local race car engine shop that did the machine work for us.
a 351Clevland with lots of Good-parts, Flo-benched and port-matched heads with Ferrea Stainless Valves 2.190 Int 1.70 Exh and Hardened Seats, K-Line Bronze Guides, Harland-Sharp Rockers, Springs, Retainers on a Crane rocker stud conversion kit.
Comp Hydro Cam .515 In .541 Ex Lift, 219 In 232 Ex Duration, Comp Lifters, Hi-tech Pushrods.
Block was Decked .010 to clean it up, champhered and polished all oil passages, brass freeze plugs,
Ford MS Rods & Pistons, Sealed Power Molly Rings,
Crank was turned .010, the counter weights were smothed an ATI Balancer, SPEC Alunium flywheel, Diaphram Clutch and all Dynamic Balanced.
Melling oil pump, Canton 8qt oil pan. Weeland alunium water pump. Eddlebrock Torquer manifold,
All ARP Stainless Bolts, Felpro Gaskets, Clevite 77 Berrings,.
now to add the fuel and ignition systems. Lakewood bellhousing, Tremec 5spd-od tranny and put it in the chasis.
http://www.uniquecobra.com/uploaded/jerrybp/351clev.JPG
Work in Progress Unique 427-9429 400hp 351C Tremec 5spd by Bruce, Greg & Jerry Porter
a 351Clevland with lots of Good-parts, Flo-benched and port-matched heads with Ferrea Stainless Valves 2.190 Int 1.70 Exh and Hardened Seats, K-Line Bronze Guides, Harland-Sharp Rockers, Springs, Retainers on a Crane rocker stud conversion kit.
Comp Hydro Cam .515 In .541 Ex Lift, 219 In 232 Ex Duration, Comp Lifters, Hi-tech Pushrods.
Block was Decked .010 to clean it up, champhered and polished all oil passages, brass freeze plugs,
Ford MS Rods & Pistons, Sealed Power Molly Rings,
Crank was turned .010, the counter weights were smothed an ATI Balancer, SPEC Alunium flywheel, Diaphram Clutch and all Dynamic Balanced.
Melling oil pump, Canton 8qt oil pan. Weeland alunium water pump. Eddlebrock Torquer manifold,
All ARP Stainless Bolts, Felpro Gaskets, Clevite 77 Berrings,.
now to add the fuel and ignition systems. Lakewood bellhousing, Tremec 5spd-od tranny and put it in the chasis.
http://www.uniquecobra.com/uploaded/jerrybp/351clev.JPG
Work in Progress Unique 427-9429 400hp 351C Tremec 5spd by Bruce, Greg & Jerry Porter