View Full Version : Hey, Alan....
TurnpikeBoy
June 11th, 2003, 10:28 PM
While you're out there, any advise you may have on set-up of the front sway bar might be good. Mine is as delivered; not being a suspension genius, I'm curious if it should be preloaded / unloaded / biased / etc.
Any hints?
Yeehah
Aggressor
June 12th, 2003, 10:52 PM
TurnpikeBoy:
My Unique has front and rear bars. Both were set with no preload, adjusted level, and tightened with the car resting on level ground. The only changes I made were to tap and replace the the rear mount bolts with larger 3/8 inch bolts and to replace the rubber bushings with greasable polyurethane units available from the local A&A Automotive. The car exhibits good control in the Pennsylvania "Twisty's". (Should also work in Jersey)
-Aggressor
Aggressor
June 12th, 2003, 10:52 PM
TurnpikeBoy:
My Unique has front and rear bars. Both were set with no preload, adjusted level, and tightened with the car resting on level ground. The only changes I made were to tap and replace the the rear mount bolts with larger 3/8 inch bolts and to replace the rubber bushings with greasable polyurethane units available from the local A&A Automotive. The car exhibits good control in the Pennsylvania "Twisty's". (Should also work in Jersey)
-Aggressor
TurnpikeBoy
June 12th, 2003, 11:57 PM
Thanks, Geary - really out of my element when it comes to suspension tuning. Will apply your way of things.
I don't have the rear bar; does it make much difference?
Yeehah
TurnpikeBoy
June 12th, 2003, 11:57 PM
Thanks, Geary - really out of my element when it comes to suspension tuning. Will apply your way of things.
I don't have the rear bar; does it make much difference?
Yeehah
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.