View Full Version : Weaver ? about Jag links
rdorman
May 22nd, 2003, 01:31 AM
My Unique has rods running forward from the lower arms of the Jag IRS but I have noticed the new ones have them running rearward. Why was the change made? Would it be of benefit to do it to mine? The bolt on the arm where the spherical bearing fits was extra long and there was rubber both sides of the bearing on the bolts. Should this be allowed to slide side to side on the bolt or not?
Thanks
Rick
Mike Geddes
May 22nd, 2003, 04:27 AM
Good question Rick
My 427 is the same..older..1991
Has the single forward links.
I'd be interested to see a response from someone on that issue.
Mike
Mike Geddes
Mike Geddes
May 22nd, 2003, 04:27 AM
Good question Rick
My 427 is the same..older..1991
Has the single forward links.
I'd be interested to see a response from someone on that issue.
Mike
Mike Geddes
Poorboy
May 22nd, 2003, 11:55 AM
You both would better off to make the up grade to the rear trailing arms. They keep the rear suspension from binding up. With the forward arms at full travel they tend to pull the axle forward. The change is not hard to do.
Poorboy
Poorboy
May 22nd, 2003, 11:55 AM
You both would better off to make the up grade to the rear trailing arms. They keep the rear suspension from binding up. With the forward arms at full travel they tend to pull the axle forward. The change is not hard to do.
Poorboy
rdorman
June 4th, 2003, 11:03 PM
Thanks Poorboy
No Weaver comment?
Thanks
Rick
rdorman
June 4th, 2003, 11:03 PM
Thanks Poorboy
No Weaver comment?
Thanks
Rick
Rich
June 5th, 2003, 12:19 AM
I need to do this too. What would this upgrade cost?
Rich
Rich
June 5th, 2003, 12:19 AM
I need to do this too. What would this upgrade cost?
Rich
Rich
June 8th, 2003, 12:44 PM
Okay...let's try this. How much for the parts to do the conversion?
Rich
Rich
June 8th, 2003, 12:44 PM
Okay...let's try this. How much for the parts to do the conversion?
Rich
Poorboy
June 9th, 2003, 04:53 PM
Rick, Rich,& Mike;
The cost of the parts to do the rear trailing arms is $325.00. It is an easy conversion, 1 pice has to be welded on the rest is bolt on.
Poorboy
June 9th, 2003, 04:53 PM
Rick, Rich,& Mike;
The cost of the parts to do the rear trailing arms is $325.00. It is an easy conversion, 1 pice has to be welded on the rest is bolt on.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.