View Full Version : My Engine
pbrown
January 28th, 2003, 11:56 AM
I wanted to post some photos of my engine. I still don't have a car to add this to yet but I keep saving. Maybe someday this thing will run.
http://www.uniquecobra.com/uploaded/pbrown/engine1.jpg
Here's another.
http://www.uniquecobra.com/uploaded/pbrown/engine2.jpg
And another.
http://www.uniquecobra.com/uploaded/pbrown/engine3.jpg
I modified the March alternator bracket to mount the alternator lower. Do you think it will fit okay this way?
Patrick Brown
GeorgiaSnake
January 28th, 2003, 06:15 PM
Patrick, I don't think that motor is going to work so I'll send you money for the freight and you can send it right over.:)
Unique 289 FIA
Southern Automotive 396
Paint ??
Wheels ??
GeorgiaSnake
January 28th, 2003, 06:15 PM
Patrick, I don't think that motor is going to work so I'll send you money for the freight and you can send it right over.:)
Unique 289 FIA
Southern Automotive 396
Paint ??
Wheels ??
weaver
January 29th, 2003, 06:38 AM
Patrick, you might have a problem with it hitting the frame rail on the pass side, we position the alternator up high. Your engine looks great, is it going in a FIA car?
Alan Weaver
weaver
January 29th, 2003, 06:38 AM
Patrick, you might have a problem with it hitting the frame rail on the pass side, we position the alternator up high. Your engine looks great, is it going in a FIA car?
Alan Weaver
pbrown
January 29th, 2003, 12:44 PM
It will go into a 427 car with either a 3550-II or TKO-II.
--Patrick
pbrown
January 29th, 2003, 12:44 PM
It will go into a 427 car with either a 3550-II or TKO-II.
--Patrick
weaver
January 29th, 2003, 10:08 PM
We are about to start on a deluxe pallet kit that is going to a customer in Vancouver Wa , you might want to get with him and take a look.
Alan Weaver
weaver
January 29th, 2003, 10:08 PM
We are about to start on a deluxe pallet kit that is going to a customer in Vancouver Wa , you might want to get with him and take a look.
Alan Weaver
excelguru
January 30th, 2003, 11:02 PM
Beautiful engine! I agree with Alan's comments on the alternator. It sure looks like it'll hit the rail. What a beauty!
Keith :)
excelguru
January 30th, 2003, 11:02 PM
Beautiful engine! I agree with Alan's comments on the alternator. It sure looks like it'll hit the rail. What a beauty!
Keith :)
Rich
January 31st, 2003, 09:04 PM
Patrick,
Come to the Red Hook Brewery today (Saturday) at noon for the 3rd Annual NWCC Bull Session. Weather permitting, I'll have my car there and you can check if there'll be enough clearance.
Rich
Rich
January 31st, 2003, 09:04 PM
Patrick,
Come to the Red Hook Brewery today (Saturday) at noon for the 3rd Annual NWCC Bull Session. Weather permitting, I'll have my car there and you can check if there'll be enough clearance.
Rich
pseim
February 3rd, 2003, 12:50 AM
Patrick,
Engine looks great! what are the details?
I'm the new owner Alan referred to down in Vancouver. I hope to have the car in early March.
I'm building a 390 FE for the car.
Paul F. Seim
pseim
February 3rd, 2003, 12:50 AM
Patrick,
Engine looks great! what are the details?
I'm the new owner Alan referred to down in Vancouver. I hope to have the car in early March.
I'm building a 390 FE for the car.
Paul F. Seim
pbrown
February 3rd, 2003, 01:40 AM
351W bored .030 over
Ford Racing 393 crank
Eagle ESP rods
KB pistons with 22cc dish
Edelbrock Performer RPM heads (the bigger valve version)
For Racing crank dampner
Ford Racing billet steel flywheel
Edelbrock Performer RPM cam and lifters
Edelbrock Performer RPM Air-Gap intake
Edelbrock timing chain
Edelbrock water pump
MSD billet distributer
Canton oil pan, pickup, and dip stick
Blue Thunder timing chain cover
Blue Thunder main cap girdle
Comp Cams roller cam thrust bearing
Comp Cams Pro Magnum rockers
Mellings high volume oil pump
Cobra valve covers from Tony Branda
Speed Demon 750cfm mechanical carb
compression ratio is 9.85:1
--Patrick
pbrown
February 3rd, 2003, 01:40 AM
351W bored .030 over
Ford Racing 393 crank
Eagle ESP rods
KB pistons with 22cc dish
Edelbrock Performer RPM heads (the bigger valve version)
For Racing crank dampner
Ford Racing billet steel flywheel
Edelbrock Performer RPM cam and lifters
Edelbrock Performer RPM Air-Gap intake
Edelbrock timing chain
Edelbrock water pump
MSD billet distributer
Canton oil pan, pickup, and dip stick
Blue Thunder timing chain cover
Blue Thunder main cap girdle
Comp Cams roller cam thrust bearing
Comp Cams Pro Magnum rockers
Mellings high volume oil pump
Cobra valve covers from Tony Branda
Speed Demon 750cfm mechanical carb
compression ratio is 9.85:1
--Patrick
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.